- EZARC Titanium Oscillating Tool Blades, Oscillating Multitool Blades for Metal, Wood Nails, Screws Cutting, Plastic, 3 Pack

Great Blades! Purchased these blades instead of buying at the local hardware. Good value for the money. Cut through 8 spike nails for a project. The blade cut right through each nail as if it was brand new. The cutting edge on the blade appeared to be just as sharp as the unused blades. I would recommend

Needed to cut a brass lock nut off of a bathroom faucet that was corroded and wouldn't spin off. It was in a difficult position so I needed a longer blade. Couldn't find a carbide blade with the extra length so went with these since they claim they are ok for metal. These cut fine, but I did have a problem with one blade where the attachment slot cracked and began to spread (see photo). I contacted EZARC customer service and was promptly sent out a replacement set. So I give the blade 4 stars and one extra star for the great customer service. I've used other EZARC blades with no issues, so assume the issue was a one off. Would still recommend EZARC blades.

After cutting about 15–16 nails, it becomes harder to cut more because the teeth wear out fasyer that expected.

I gotta tell you, they actually worked, I had to cut out some metal studs inside a wall cavity, it's really hard to get anything in there, but these blades cut through, you have to hold the stud with one hand and steady the oscillator with the other because there's a lot of vibration, but not enough to do damage and like I said, it did the trick, and you can't beat the Price.

Seem good so far. Used to trim a toe kick on a cabinet.

Pretty meh - The “titanium” blades did not get dull, they started out dull. At least the cheap bimetal blades start out sharp.

It finished the job, especially in hard to reach places. Every blade was used and it did what it was supposed to do perfectly. Especially, cutting through old 16 penny nails. Highly recommended, Goggles and a good dust mask is a must.

Not false advertising, but I definitely say it’s deceiving. I’m returning look at the picture. Barely even scratched the screw. I was trying to cut off the front metal in the advertisement and looking closely at the packaging it says aluminum it also says it cuts wood with nails take a look at the picture. All I did was tear the teeth off of the blade might be good for Wood. I would not recommend these.

Perfekt när du kapar och det finns metall i virket.

Me gustaría dar una opinión del producto haciendo su trabajo, pero no le he utilizado, si puede decir que tiene muy pero muy buena presentación, se ven robustar y con buenos dientes de corte. Una vez utilizado el producto daré una opinión como debe de ser.

Exelentes sierras

Buen acabado y resistente. Probado con tubo cuadrado de 3 y 4 mm. Y ningún problema.

Ottimo prodotto