RECI CO2 Laser Tube 90W (Peak 100W) 1240mm W2/S2 18 Months Warranty Shipping from US Duty Free for Laser Engraving Cutting

• RECI W2 Laser Tube: 90W Max. 100W) CO2 laser tube with high quality, stability and performance. Higher efficiency for the laser engraving and cutting..
• The RECI W2 laser tube has a diameter of 80mm and a length of 1240mm. Please make sure that the laser engraving machine has enough space to accommodate the laser tube..
• Tips: The recommended current for the RECI W2 laser tube is 25mA. The long-term operating current should be controlled at 26mA or below. The maximum operating current must be controlled at 28mA or less..
• Wide Application: Reci laser tube possesses higer power than the same length laser tube. It is great for acrylic, cardboard, ceramics, fabric, glass, leather, paper, stone, wood and etc..

Features of RECI Laser Tube: Stable power, less attenuation Higher cutter efficiency, energy concentration Longer service life, longer Maintenance period Parameters Diameter: 80mm Rated Power: 90W Max Power: 100W Length: 1240mm Lifespan: 10000h Installation 1. Connect the positive and negative pole of laser tube and power supply, and insulate it properly. 2. Connect the inlet and outlet of the laser tube. 3. Turn on the water circulation, so that the cooling water through the entire water line, avoid air bubbles, otherwise there is a risk of burst pipes. 4. Start inching, the laser tube emit laser light, adjust the position of the laser tube so that the spot hit in the middle of the reflective mirror. 5. If the light path is not correct, adjust the position of the laser lens until light path adjustment is complete. 6. When the laser tube is first used, generally adjust 50%-60% of the power to work (can be adjusted according to the actual use of the situation). RECI Laser Tube Light Problems Self-checking First of all, please open the back cover to check the laser light, the normal light color is light pink. If there are no issues with the light, but the processing effect is not ideal, please check the following aspects: A. The output lens of the laser head is contaminated, please gently wipe with anhydrous alcohol. B. Laser lens is contaminated, including 3 pieces of reflective mirrors and 1 piece of focus lens, please wipe with anhydrous alcohol or replace them. C. The optical path is not adjusted well, the light does not shoot out from the laser head or the optical path is not perpendicular, please adjust the optical path again. D. Laser power supply is damaged, although the laser tube is bright but weak, please adjust to the maximum light intensity, such as the ammeter value only shows below 10mA, the power supply is damaged, please replace the power supply. E. Cooling system problems, water circulation is too slow, the laser temperature is too high, resulting in poor cooling effect, check the entire water circuit is not blocked (water pipe folding), the water pump or water chiller is damaged or not, please repair in time!