Loctite Vinyl Fabric & Plastic Repair Flexible Adhesive, clear liquid adhesive ideal for repairing vinyl seats, cushions, tarps, and outdoor gear, highly flexible to withstand bending and torsion

served my purpose.

The quality is definitely much better than the local indian options available like Fevi-Bond. This is a flexible adhesive, which is not like 'Fevi-Quick" which is a different bonding solution. However, this works for most of general glue needs as well.Only drawbacks are that it is quite expensive (since it is imported), and that the tube starts getting minor cracks over time making it susceptible to drying. You should go for it only if you need a flexible glue and cheaper options like Fevi-Bond isn't helping you out. Also always do a patch test for Fevi-Bond and other adhesives , as if they don't help, they will ruin your product for applying any other glue in the future as well.I used it for sticking my shoe sole which came off, and it did last quite long. I have also used it to stick a fabric patch to an artificial jacket like material, and it was effective even there. Know your use before buying.

Good

Not great for gluing rubber soled sneakers.

Totally ineffective. Instead buy Feviquick for Rs. 5.

Heavy

Good product,

It’s amazing. Quality, it’s very very good. I have repair my air mattress with this.Actually, I am worried about my mattress. I don’t know it’s Work,, or not, but when I use this product, it’s amazing. It’s perfectly worked. If you think about,, you just order now.

Perfect to repair the SUP ,hold pressure

Effectively stuck Velcro to vinyl. Will have to wait and see how the flexibility is after a period of time

Wow this glue brand is truly one of the best there is! I split the hole in my dolls head and needed a strong adhesive that would tackle vinyl material! It easily comes out of the tube clear and a good consistency, I just smoothed it over the cracks and left drying, which later left a strong bond but still flexible enough for me to work on adding a ball joint cap etc to finish my connection of doll parts! Highly recommend for rubbers, vinyl materials that need a little stretch it works well with them!

I accidentally brushed up against a rose thorn bush, and much to my dismay it tore a small part of the arm in my leather jacket! It's a genuine leather (technically sheep skin) jacket from Emporio Armani. I was able to repair it to my satisfaction (see pics), and so far the glue seems to hold well while being flexible, and I'm happy with how the seam was closed up. I did some research prior to purchasing this, so I'll list the steps I took below. One thing that I saw some reviewers mention is that the glue melted away some of the fabric they were working with (but I believe they were using faux leather). This was not the case when I used it on real leather, so I would recommend this product for anyone with a similar use case to mine.Here are the steps:Materials needed:(1) Loctite Vinyl Plastic Adhesive Glue (this amazon listing)(2) A palette knife (I bought this one and used the smallest one: https://www.amazon.com/gp/product/B072P1R5B7/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 )(3) A piece of thin, flexible fabric that is a bit larger than the size of the tear you're working with. (e.g. if you have a 10mm diameter hole, the piece of fabric you use should be at least 14-18mm diameter). Doing research online, the most commonly recommended material was "organza fabric", which is very thin, strong, and most importantly mimics the flexibility of leather. This is what I bought: https://www.amazon.com/gp/product/B0842WZB2H/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1If you have any thin flexible fabric laying around, it should work. Just keep in mind that organza is super thin which is nice. If you use a material that is too thick, it may cause the area around your tear to appear stiffer than the rest of your jacket, and so you'll end up seeing an outline of the fabric.(4) A Q-Tip(5) Tape (e.g. masking tape) which is gentle, easy to remove, and does not leave residue. It will touch your leather, so make sure it's not too strong so it doesn't damage the leather when you remove it.(6) Acetone / Nail Polish Remover (not mandatory, but I HIGHLY recommend you keep it handy so you can either fix a mistake, but also it allows you to clean up your edges for a sharp/tight seam).(7) Scissors (to cut the organza fabric and to possibly trim the tear to clean it up if needed)(8) ToothpickSteps:(1) Protect the area surrounding your tear by putting masking tape. This is important because you don't want your glue to accidentally land on some other part of your jacket!(2) Get your organza (or other flexible, thin fabric) piece ready. Trim it to size if needed. Make sure it is bigger than the tear itself.Details: This piece is going to be a subpatch / "sub patch". The way jackets work is that on the outer side is the actual leather material, but on the opposite side of the leather (the side your body touches when you put it on) is a different type of flexible fabric that is not leather. That fabric is stitched/attached to the leather at various points on the jacket, but on a majority of the jacket it is not. What we DO NOT want to do is glue the leather to the fabric that came with the jacket. That's not how the jacket was originally designed, and doing so could cause you to tug on the leather when you move around because now the inside fabric will be glued to the leather. That's why we instead get a piece of organza fabric and use that as a subpatch which will serve as a substrate on which the glue will be applied, and then the torn leather will be glued to the subpatch. The subpatch is a meeting place for where the torn piece of the leather meets with the original untorn portion of the leather, and going forward will remain between the leather and the original inside fabric forever. The sub patch should NOT be glued to the inside fabric. It should only be glued to the leather.(3) Using the palette knife and a toothpick if needed (or even your fingers if the tear is big enough), gently slide the subpatch underneath the tear. In other words, stick the subpatch into the tear, and then flatten out the subpatch so that when you look through the hole/tear in your jacket, the only thing you see is the subpatch.(4) Open the loctite vinyl glue. DO NOT open it over your jacket. Open somewhere else to the side. When I opened it for the first time (where you have to pierce it using the cap), a little bit oozed out everywhere...good thing it wasn't over my jacket!Now, using your finger, a Q tip, and/or a toothpick (or whatever method you're comfortable with), gently apply a thin layer of the glue onto the subpatch. In other words, gently lift the tear to expose the subpatch that you placed underneath, and apply the glue. A thin layer is all you need.(5) Gently close the tear and press it onto the subpatch. Try to line up the tear as well as you can so the seam is as invisible as possible. If you want, you can add a tiny bit of the glue (super thin layer) directly over the seam to make it extra snug and secure. Then, apply a tiny bit of acetone (nail polish remover) on a q tip and do a few gentle, light strokes over the excess glue on the seam. This will clean up the excess glue so that only the glue that has fallen through the cracks between the seam will remain.(6) Optionally apply masking tape onto the tear itself so it doesn't accidentally open up again during the drying/curing process. I didn't end up doing this because by the time I finished steps 1-5 above, it was already stiff enough that I wasn't worried..(7) Remember how I said that you DO NOT want the sub patch to be glued to the inside fabric of your jacket? Well, be sure to look on the inside of your jacket and make sure this isn't the case! The organza subpatch fabric is porous, so in my case some of the glue made it to the opposite side of the subpatch and caused it to adhere to the inside of my leather jacket. Good thing I had immediately checked, because the solution was super simple: I just put a bit of acetone on a Q-tip and rubbed it over the the inside fabric (from the inside of my jacket) where it was accidentally adhered. I gently rubbed and pulled until the subpatch was separated from the internal fabric.(8) Let the glue cure...Loctite's instructions recommend 24 hours. I waited about 18 hours before putting the jacket back on.... and it works great!

This glue worked perfectly.