fits Case Shell Key Fob Keyless Entry Remote (Cutting Not Required)

Just installed these and so far they are pretty sturdy. My old fobs busted and these so far are working well. The key blade is a very tight fit but with a little work you can get it in. All the other components transferred very easily. I bought this for a 2008 Lexus RX 350. I think it will work for a long time.

The key to my 2002 Lexus GS300 finally broke in pieces (understandable since the key was 23 years old🤷🏼‍♀️) The plastic casing cracked which then caused it to break in half - but the key blade itself was still intact and the electronic “brain” inside it of the plastic casing -which internally houses the battery and the chip (that the car reads when the key is put into the ignition in order to signal to turn over the engine) Also the 3 buttons to the car located on the outside of the “brain” (lock/ unlock/trunk/panic buttons) -all of it intact I could have had a new key made/duplicated as many would probably do as they assume it’s the only option but that would have cost me $200-400 thanks to the chip that would need to be programmed into the new key which makes it so pricey But since I had all the parts I needed I felt I had other options -a little Amazon search and I was right !! And for only $5.99 ?! Winning !!! Delivered to my house in 2 days -exactly as expected, everything I needed, popped the old parts out, new parts in, put it together, screwed in the new screw with the mini screwdriver all provided with my $5.99 purchase -went and tested it just in case and not a problem! Fit like a glove, literally is exactly the key it used to be 23 years ago to a T and I bet I could get another 23 years out of this new key -if the car would let it happen by lasting that long but I’m sure this replacement key will long outlive the car lol

My original key case was cracked and got progressively worse so I bought this to replace the case rather than replacing the entire key for my 2008 Lexus 400h. The actual battery component of the key fit great (although the plastic for the replacement case is a little thicker, so the buttons don't protrude out as much). But to remove the actual key KEEP IN MIND you have to use pliers or melt the plastic to get the key out of the original case. Additionally, once I removed the key, the hole to put the metal key in was much too small. I had to use pliers and force the key in. Additionally, the case wouldn't close all the way and now there is still a gap. Pros: Easy and cheap replacement Cons: Had to remove key from original case and force the key in the new case, new case is still too tight to screw closed.

The package of two fob cases was delivery on time. It did work perfectly for me. It is made of plastic. Electronic/battery fits well, no gap after putting in the screw. Just an extra time breaking the old plastic piece that hold the key, the new replacement piece is very tight so I put a little Vaseline/silicone lubricant to slip in your old key. This review is on base of my experience, I am happy with this cheap piece.

Able to place the Key and the Remote inside this casing although it is not a perfect fit as it leaves a "gap" in between like all other reviews described. The remote buttons works and this FOB casing is able to fit the original Lexus inside of this case without any modification. Don't know yet how durable this will be as this casing fits as a replacement key FOB for the 2001 Lexus GS300 key. Easy to install and good value for the money.

While it does TECHNICALLY fit, it leaves a lot to be desired. Considering this product is just plastic and doesn't require any advanced machining, this was very disappointing. The key blade itself was a nightmare to get into the small plastic holder they provide. I heard of some people soaking it in warm water, or using lube to get the blade in. I used some WD-40 and pliers and got it with some patience. Once you put the fob/transponder in, the casing doesn't close all the way, even after I did some sanding and got it to fight a little bit better, it still will not close all the way. I've concluded the issue is not one of rough edges that can be sanded down, but rather the whole casing itself is just slightly too small to fit it all in there nicely. The buttons are now recessed WAY deeper than the on the original key, which makes pushing the buttons slightly more awkward and annoying since you have to stick you finger IN the slot to push the button, but its still possible. Overall, not sure why this product was so highly rated, perhaps it is just my year and key that it doesn't fit well for. Given the price, I can't be too mad, but I will be looking around for another option, but this will work for the mean time. EDIT: In about April 2023, a year after we bought this product, the whole shell cracked and broke. Horrendous product. Stay away.

This product is a great replacement to the original design defective case shell ignition key for the 2000 Lexus RX 300 . What makes it different is the "neck" piece which strengthens the case to withstand the frequent gyration of the ignition key to start and turn off the vehicle. The original Lexus case breaks rather easily because it does not have the neck and it is therefore subject to all the hand pressure of the turn on an off action of the ignition key. On the other hand the installation of the"old ignition key and the entry FOB remote " is very easy to assemble especially with the help of the small screw driver provided as a package. Although I do not know how durable the piece will be , I think is a Good Product .

This is a HUGE find. The plastic case on my Lexus key broke. I know Lexus would be very very expensive, so I thought I would go to my local Ace Hardware. I thought, it must be common for this to happen. I was shocked when Ace needed to cut a new key and program my lock system for the hefty price of $298. A simple search on Amazon and I found this GEM. Fits perfectly and is easy to install

Looks and works like new - this has given a new life to the original key. Saved the significant cost of a new key. It was a tight fit into the small plastic section that holds the blade but once in that resulted in a secure fit.

Casi perfecto, sino fuera porque es un poco más gruesa que la original, y los botones quedan un poco undidos.

Queda un poco hundido los botones y hay que ajustar para colocar la llave

Good buy

Se indica que son 2 carcazas Pero solo llegó uno, no llego completo.